Shooting Industry Magazine: "FNH USA • (703) 288-1292 • www.fnhusa.com
FN FNP-45 Stainless
FN SLP Mark I
The FN FNP-45 Autoloading Pistol utilizes double-action/single-action operation. It features a high-capacity, ergonomic polymer frame with interchangeable backstrap inserts, accessory rail, ambidextrous frame-mounted decocking levers and magazine release. It has a hammer-forged barrel and loaded chamber indicator. The FNP-45 is available in matte black stainless steel and matte silver stainless steel.
The FN PS90 TR is a compact, lightweight, ambidextrous, triple-rail semiautomatic carbine based on the P90 and chambered in 5.7x28mm. The 10- or 30-round box magazine runs horizontally along the top and fired cases are ejected downward. It has a 16.04' barrel, integral muzzle brake and features closed-bolt operation. It is available with a black or olive drab stock.
The FN SLP Mark I autoloading shotgun features an aluminum alloy 12-gauge, 3' magnum receiver, eight-shot magazine tube and 22' barrel with the Standard Invector choke tube system. The Active Valve system automatically adjusts the exact amount of gas needed to operate the action and two interchangeable gas pistons are included. The checkered matte black synthetic stock is equipped with a premium recoil pad and steel sling swivel studs. An adjustable folding rear sight, red fiber-optic front sight element and Weaver-pattern cantilever optics rail are standard.
FN and C-More Systems introduce low-profile, non-snag 3-dot fixed combat sights for the FN Five-seveN 5.7x28mm pistol, with optional self-luminous tritium elements. The sights are offered as an accessory, with plans to include them as standard equipment on select models of the Five-seveN USG pistol later this year."
Monday, January 22, 2007
RamShot Load Data
Another set of official load data.
Follow the link in the title for properly formatted version.
Western Powders Inc
Ramshot powders
Caliber:
5.7mmx28 FN
Bullet
Bullet
Bullet
Start
Start
Max
Max
Max
Weight
make
Designation
Load
Velocity
Load
Velocity
Pressure
COL
Grains
or type
(grains)
(Fps)
(grains)
(psi)
(Inches)
Barrel: 5"
Twist: 1 in 9"
Primer: WSR or WSP(see note 4 below)
Bullet diameter: .224"
Case length
Min: 1.123"
Max: 1.143"
Max COL: 1.590"
True Blue
35
Hornady
V-Max FB
5.7
1923
6.4
2077
45500
1.491
True Blue
40
Sierra
SP-Hornet FB
5.6
1813
6.3
1961
45300
1.456
True Blue
45
Sierra
SP-Hornet FB
5.4
1700
6.1
1858
45600
1.490
Special Notes:
1) This is an extremely sensitive caliber, please adhere closely to indicated loads and COL guidelines.
2) Allways begin loading at the MINIMUM "START" load and increase with 0.1grain increments
3) We strongly recommend using only FLATBASE bullets (especially in the Handgun)
4) When SP primers are to be used, a slightly lower performance can be expected
5) Add 10% to the above published velocities for the 10" barrel of the FN P90 PDW weapon
6) Excessive muzzle blast and flash is normal with this caliber
Follow the link in the title for properly formatted version.
Western Powders Inc
Ramshot powders
Caliber:
5.7mmx28 FN
Bullet
Bullet
Bullet
Start
Start
Max
Max
Max
Weight
make
Designation
Load
Velocity
Load
Velocity
Pressure
COL
Grains
or type
(grains)
(Fps)
(grains)
(psi)
(Inches)
Barrel: 5"
Twist: 1 in 9"
Primer: WSR or WSP(see note 4 below)
Bullet diameter: .224"
Case length
Min: 1.123"
Max: 1.143"
Max COL: 1.590"
True Blue
35
Hornady
V-Max FB
5.7
1923
6.4
2077
45500
1.491
True Blue
40
Sierra
SP-Hornet FB
5.6
1813
6.3
1961
45300
1.456
True Blue
45
Sierra
SP-Hornet FB
5.4
1700
6.1
1858
45600
1.490
Special Notes:
1) This is an extremely sensitive caliber, please adhere closely to indicated loads and COL guidelines.
2) Allways begin loading at the MINIMUM "START" load and increase with 0.1grain increments
3) We strongly recommend using only FLATBASE bullets (especially in the Handgun)
4) When SP primers are to be used, a slightly lower performance can be expected
5) Add 10% to the above published velocities for the 10" barrel of the FN P90 PDW weapon
6) Excessive muzzle blast and flash is normal with this caliber
Friday, January 19, 2007
AR15.COM :: Forums :: Topic :: Make your own TAC SLING for 10 bucks! Pics and detailed instructions inside 56k warning
AR15.COM :: Forums :: Topic :: Make your own TAC SLING for 10 bucks! Pics and detailed instructions inside 56k warning
Nice article with pics on the creation and use of a three point sling.
Nice article with pics on the creation and use of a three point sling.
Displaying ammo collection. How to do it?
Posted by marlinman93:
Displaying ammo collection. How to do it?: "It's best to lay them out on a piece of colored hard board, or heavy cardboard. Find a large picture frame first, that will hold the number of cartridges you want to display. When you lay them all out, take a Sharpie, or fine tip pen, and put a dot on either side of each case. This will give you a mark to drill a small hole for a retaining wire. After drilling a hole for each cartridge, get some small copper wire, and push it through the holes, securing the cartridge to the board by twisting the wire together on the back.
Rainbow or circular patterns look better than straight rows. If you need more room, a small half circle inside of a larger half circle will get them all in. Try to type up labels to glue on beside each cartridge, to identify the caliber. This is similar to what the ammo makers did with their bullet boards in the past. If you want to get really creative, you could get a picture of a big game anaimal, and have it blown up as a background for your display board.
Good luck!"
Displaying ammo collection. How to do it?: "It's best to lay them out on a piece of colored hard board, or heavy cardboard. Find a large picture frame first, that will hold the number of cartridges you want to display. When you lay them all out, take a Sharpie, or fine tip pen, and put a dot on either side of each case. This will give you a mark to drill a small hole for a retaining wire. After drilling a hole for each cartridge, get some small copper wire, and push it through the holes, securing the cartridge to the board by twisting the wire together on the back.
Rainbow or circular patterns look better than straight rows. If you need more room, a small half circle inside of a larger half circle will get them all in. Try to type up labels to glue on beside each cartridge, to identify the caliber. This is similar to what the ammo makers did with their bullet boards in the past. If you want to get really creative, you could get a picture of a big game anaimal, and have it blown up as a background for your display board.
Good luck!"
www.Pjs-SteyrAug.com
http://www.pjs-steyraug.com/:
"Specializing In Advanced USA Made
'Bull Pup' Style Tactical Weapons"
An option for AUG fans.
"Specializing In Advanced USA Made
'Bull Pup' Style Tactical Weapons"
An option for AUG fans.
Thursday, January 18, 2007
Wednesday, January 17, 2007
Monday, January 15, 2007
Accurate powders load data for the 5.7x28mm
Follow the link above for the readable PDF version
Western Powders Inc
Accurate powders
Caliber:
5.7mmx28 FN
Bullet
Bullet
Bullet
Start
Start
Max
Max
Max
Weight
make
Designation
Load
Velocity
Load
Velocity
Pressure
COL
Grains
or type
(grains)
(Fps)
(grains)
(Psi)
(Inches)
Barrel: 5"
Twist: 1 in 9
Primer:WSR or WSP(see note 4 below)
Bullet diameter:.224"
Case length
Min: 1.123"
Max: 1.143"
Max COL: 1.590"
No 5
35
Hornady
V-Max FB
6.0
1955
6.7
2100
45500
1.491
No 5
40
Sierra
SP-Hornet FB
5.8
1850
6.5
1975
45200
1.456
No 5
45
Sierra
SP-Hornet FB
5.7
1740
6.4
1875
45400
1.490
No 7
35
Hornady
V-Max FB
7.4
2041
8.2
2197
45200
1.491
No 7
40
Sierra
SP-Hornet FB
7.0
1896
7.7
2044
45100
1.456
No 7
45
Sierra
SP-Hornet FB
6.7
1782
7.4
1913
45400
1.490
Special Notes:
1) This is an extremely sensitive caliber, please adhere closely to indicated loads and COL guidelines.
2) Allways begin loading at the MINIMUM "START" load and increase with 0.1grain increments
3) We strongly recommend using only FLATBASE bullets (especially in the Handgun)
4) When SP primers are used slightly lower performance can be expected
5) Add 10% to the above published velocities for the 10" barrel of the FN P90 PDW weapon
6) Excessive muzzle blast and flash is normal for this caliber
Western Powders Inc
Accurate powders
Caliber:
5.7mmx28 FN
Bullet
Bullet
Bullet
Start
Start
Max
Max
Max
Weight
make
Designation
Load
Velocity
Load
Velocity
Pressure
COL
Grains
or type
(grains)
(Fps)
(grains)
(Psi)
(Inches)
Barrel: 5"
Twist: 1 in 9
Primer:WSR or WSP(see note 4 below)
Bullet diameter:.224"
Case length
Min: 1.123"
Max: 1.143"
Max COL: 1.590"
No 5
35
Hornady
V-Max FB
6.0
1955
6.7
2100
45500
1.491
No 5
40
Sierra
SP-Hornet FB
5.8
1850
6.5
1975
45200
1.456
No 5
45
Sierra
SP-Hornet FB
5.7
1740
6.4
1875
45400
1.490
No 7
35
Hornady
V-Max FB
7.4
2041
8.2
2197
45200
1.491
No 7
40
Sierra
SP-Hornet FB
7.0
1896
7.7
2044
45100
1.456
No 7
45
Sierra
SP-Hornet FB
6.7
1782
7.4
1913
45400
1.490
Special Notes:
1) This is an extremely sensitive caliber, please adhere closely to indicated loads and COL guidelines.
2) Allways begin loading at the MINIMUM "START" load and increase with 0.1grain increments
3) We strongly recommend using only FLATBASE bullets (especially in the Handgun)
4) When SP primers are used slightly lower performance can be expected
5) Add 10% to the above published velocities for the 10" barrel of the FN P90 PDW weapon
6) Excessive muzzle blast and flash is normal for this caliber
SLiP2000™ - Brush Buddy
SLiP2000™ - Brush Buddy: "ELIMINATES THE NEED TO SCREW AND
UNSCREW YOUR CLEANING TOOLS
Are you tired of...
wasting your time screwing and unscrewing your cleaning tools?
spending too much money on cleaning rods so you can have one for every cleaning tool and one for every caliber?
poking you fingers while trying to screw a brush on or off?
having nasty, dirty hands from cleaning your gun?
getting toxic cleaning agents all over your hands?
needing pliers to remove a cleaning tool from your rod?
Then The Brush Buddy™ is for you.
The Brush Buddy™ is Faster and Easier
The Brush Buddy Quick Release System was invented to target the time consuming task of screwing and unscrewing your cleaning tools like your brushes, jags, patch holders and mops.
The old fashion way of changing from one cleaning tool to another by screwing and unscrewing would take from 5 to 10 seconds. With The Brush Buddy™ removing and attaching a cleaning tool will only take a split second. That's right, less then 1 second!
No more frustration trying to screw in a cleaning tool and getting the threads to line up. No more stripping threads and rendering a good cleaning tool useless. Now you can remove a cleaning tool with ease and attach it even easier.
You no longer need several rods to accomodate different cleaning tools or different calibers.
The Brush Buddy™ is Cleaner and Safer
With The Brush Buddy™ you can attach and remove cleaning tools simply by holding on to the adapter. You no longer have to grip the tool covering your hands with toxic chemicals or poke your fingers with sharp pointed tools and getting your hands nasty from carbon, lead and copper while cleaning your gun."
UNSCREW YOUR CLEANING TOOLS
Are you tired of...
wasting your time screwing and unscrewing your cleaning tools?
spending too much money on cleaning rods so you can have one for every cleaning tool and one for every caliber?
poking you fingers while trying to screw a brush on or off?
having nasty, dirty hands from cleaning your gun?
getting toxic cleaning agents all over your hands?
needing pliers to remove a cleaning tool from your rod?
Then The Brush Buddy™ is for you.
The Brush Buddy™ is Faster and Easier
The Brush Buddy Quick Release System was invented to target the time consuming task of screwing and unscrewing your cleaning tools like your brushes, jags, patch holders and mops.
The old fashion way of changing from one cleaning tool to another by screwing and unscrewing would take from 5 to 10 seconds. With The Brush Buddy™ removing and attaching a cleaning tool will only take a split second. That's right, less then 1 second!
No more frustration trying to screw in a cleaning tool and getting the threads to line up. No more stripping threads and rendering a good cleaning tool useless. Now you can remove a cleaning tool with ease and attach it even easier.
You no longer need several rods to accomodate different cleaning tools or different calibers.
The Brush Buddy™ is Cleaner and Safer
With The Brush Buddy™ you can attach and remove cleaning tools simply by holding on to the adapter. You no longer have to grip the tool covering your hands with toxic chemicals or poke your fingers with sharp pointed tools and getting your hands nasty from carbon, lead and copper while cleaning your gun."
2007 SHOT Show Coverage
Various links to other sites w/ coverage of the show:
GunBlast
http://www.gunblast.com/SHOT_Show_2007.htm "Pre-game"
SHOT Show 2007 - Day 1 Added January 11, 2007
SHOT Show 2007 - Day 2 Added January 12, 2007
SHOT Show 2007 - Day 3 Added January 13, 2007
OnPoint Firearms
http://www.onpointfirearms.com/shotshow/2007/web/default/
Shot Show 2007 - Day 1 Jan 10, 2007
Shot Show 2007 - Day 2 Jan 12, 2007
AR15.Com threads
http://www.ar15.com/forums/topic.html?b=1&f=1&t=532712
http://www.ar15.com/forums/topic.html?b=8&f=10&t=239605
SigForum threads
SHOT Show 2007 Day One
SHOT Show 2007 Day Two
SHOT Show Day Three
M4Carbine thread
http://m4carbine.net/showthread.php?t=3155
Ken Lunde's 2007 SHOT Show Photos & Report
http://lundestudio.com/2007SHOTShow/
GunBlast
http://www.gunblast.com/SHOT_Show_2007.htm "Pre-game"
SHOT Show 2007 - Day 1 Added January 11, 2007
SHOT Show 2007 - Day 2 Added January 12, 2007
SHOT Show 2007 - Day 3 Added January 13, 2007
OnPoint Firearms
http://www.onpointfirearms.com/shotshow/2007/web/default/
Shot Show 2007 - Day 1 Jan 10, 2007
Shot Show 2007 - Day 2 Jan 12, 2007
AR15.Com threads
http://www.ar15.com/forums/topic.html?b=1&f=1&t=532712
http://www.ar15.com/forums/topic.html?b=8&f=10&t=239605
SigForum threads
SHOT Show 2007 Day One
SHOT Show 2007 Day Two
SHOT Show Day Three
M4Carbine thread
http://m4carbine.net/showthread.php?t=3155
Ken Lunde's 2007 SHOT Show Photos & Report
http://lundestudio.com/2007SHOTShow/
Thursday, January 11, 2007
Galati International Online: Takedown Rifle Pouch
Galati International Online: Takedown Rifle Pouch: "Holds the Browning 22 auto, Charter Arms Explorer and other rifles not exceeding 23' in length. Features two padded pockets to keep the barrel and butt stock separate. Keep your favorite rifle close while camping or hunting. Made from PVC, a clone to ballistic nylon. Includes a sewn carry handle. Dimensions: 23' x 9 1/2'. Galati International.
100% Guarantee
2 Year Warranty"
100% Guarantee
2 Year Warranty"
Tuesday, January 02, 2007
Discreet Submachine Gun Case for FN Rifles
The Discreet FN Submachine Gun Case fits the FN P90 & PS90. It is constructed of 1000 denier nylon with 3/8" closed cell foam padding. The case has wrap-around handles and heavy-duty hardware with #10 heavy-duty zippers. The main compartment has plenty of room for the weapon with scope attached. It has tie-down straps for the weapon, plus a tie-down for an FN cleaning kit and a velcro patch for removable accessory pouch. (included) The outside pocket is fully padded and has pouches for 4 magazines.
Made in the USA.
* 1000 denier nylon construction
* Double-row stitching and bound internal seams
* Heavy-duty zippers and hardware
* 3/8" closed cell foam padding (removable)
* 2" padded shoulder strap
Made in the USA.
* 1000 denier nylon construction
* Double-row stitching and bound internal seams
* Heavy-duty zippers and hardware
* 3/8" closed cell foam padding (removable)
* 2" padded shoulder strap
Monday, January 01, 2007
High Noon Holsters
Cowhide and Horsehide holsters
Some models available for the Five-seveN (look for FNH 5.7)
Some models available for the Five-seveN (look for FNH 5.7)
Subscribe to:
Posts (Atom)